






Features and details



Container in hot dipped galvanised steel for secure and flexible storage outside or inside. The container is easy to assemble and disassemble so you always can have exactly the storage space you need.
Product Specifications
-
MaterialHot-dip galvanized steel
-
Material Weight0.75 mm
-
CertificateTÜV SÜD
-
Product NumberST83000
-
Inner Height (m)2
-
Inner Length (m)2
-
Inner Width (m)2.07
-
Weight (kg)200200.01
-
Side Plate Thickness (mm)0.75
-
Roof Plate Thickness (mm)0.75
-
Water Resistance100% Waterproof
-
Port WxH (m)1,93x1,93
Strong and flexible storage solutionFor outdoor and indoor useDouble wing doors for easy accessHandle and lock includedFramework in 2 mm galvanised steelFloor in 35 mm wooden planksMaximum load on floor: 500 kg/m2Delivered without air grille – please order separately!Can be assembled and disassembled for flexibilityContainers can be moved using a crane or a forklift truckThe sturdy and flexible storage container is the perfect solution when you need safe and flexible storage outdoor or indoor. The container can be assembled and disassembled easily by using the enclosed bolts. This means that you always can adjust your storage capacity in accordance to your changing need for storage space. The walls of the storage containers are made of 0,75 mm thick corrugated galvanised steel. The sides are riveted to a steel support made of 2 mm galvanised steel – and corner angles are made of 3 mm steel.The entire container is in galvanised steel. The corner angles are used to join the various parts of the container (floor, sidewalls, top) to transport position and for general assembly. Two outside corner angles are provided with pegs for stacking containers in transport position. Corner angles are also equipped with holes, enabling the container to be suspended by crane. Rain gutters in both ends prevent water to fall in front of entrance. Openings in the gables secure natural air flow. Both wing doors are made of 0,75 mm corrugated galvanised steel and riveted to steel supports of the door. Frames are made of 1 mm galvanised steel. The door is secured by a pull draw lever, door handle, lock with plug and prevention against buckling. The floor consist of 35 mm wooden tongue and groove planks, and the sides of the floor are fixed to horizontal steel supports. The 2,25 m and 3 m containers can also be ordered with 3 mm hot dip galvanised floor with an anti-slip surface.Safety advice - Maximum Load Floor surface - 500 kg/m2 Floor when moved with crane - 1500 kg Floor when moved with forklift truck - 3000 kg Roof surface - 100 kg/m2Accessories for storage containers Dancover offers various items for your storage container, which will customised and improve your storage solution. You can have various shelves, a drive-in ramp, gas cylinder holder, double wing door, fork guides, and a vandal bar set. If you have any questions about our storage containers or the various accessories, please contact our Storage Experts at Dancovershop.com.Please note: If you want air grilles installed in your container, you need to order this together with your container(s). You can alternatively order one or more air grilles later and install them in the container yourself. You then have to cut a hole for the air grille and mount it with four blind rivets. You can also order sidewall doors - please contact our customer service.
In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.Do not pack or unpack your tent at subzero temperatures.Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.Please note that the Dancover warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.We recommend you to check whether your tent is covered by your home contents insurance.
Membership price
Container, Orion, 2.25x2.2x2.2 m
Regular price
€2.696,47 EURincl. VAT
Recommended accessories - purchased separately

Bunded shelf for container Orion 205 cm, 1 pcs.
Sale price
€93,60 EUR

Vandal Bar for container Orion
Sale price
€0,00 EUR

Forklift guides for container Orion
Sale price
€134,40 EUR

Shelf bracket for container Orion, 1 pc.
Sale price
€13,20 EUR

Shelving upright for container Orion, 1 pc.
Sale price
€36,00 EUR
Features and details




Container, Orion, 2.25x2.2x2.2 m
Sale price
€2.696,47 EUR




