Container in hot dipped galvanised steel for secure and flexible storage outside or inside. The container is easy to assemble and disassemble so you always can have exactly the storage space you need.

Product Specifications

Material

Hot-dip galvanized steel
Material Weight

0.75 mm
Certificate

TÜV SÜD
Product Number

ST83000
Inner Height (m)

2
Inner Length (m)

2
Inner Width (m)

2.07
Weight (kg)

200200.01
Side Plate Thickness (mm)

0.75
Roof Plate Thickness (mm)

0.75
Water Resistance

100% Waterproof
Port WxH (m)

1,93x1,93

Product Info

Strong and flexible storage solution
For outdoor and indoor use
Double wing doors for easy access
Handle and lock included
Framework in 2 mm galvanised steel
Floor in 35 mm wooden planks
Maximum load on floor: 500 kg/m²
Delivered without air grille – please order separately!
Can be assembled and disassembled for flexibility
Containers can be moved using a crane or a forklift truck

The sturdy and flexible storage container is the perfect solution when you need safe and flexible storage outdoor or indoor. The container can be assembled and disassembled easily by using the enclosed bolts. This means that you always can adjust your storage capacity in accordance to your changing need for storage space. The walls of the storage containers are made of 0,75 mm thick corrugated galvanised steel. The sides are riveted to a steel support made of 2 mm galvanised steel – and corner angles are made of 3 mm steel.

The entire container is in galvanised steel. The corner angles are used to join the various parts of the container (floor, sidewalls, top) to transport position and for general assembly. Two outside corner angles are provided with pegs for stacking containers in transport position. Corner angles are also equipped with holes, enabling the container to be suspended by crane. Rain gutters in both ends prevent water to fall in front of entrance. Openings in the gables secure natural air flow.

Both wing doors are made of 0,75 mm corrugated galvanised steel and riveted to steel supports of the door. Frames are made of 1 mm galvanised steel. The door is secured by a pull draw lever, door handle, lock with plug and prevention against buckling. The floor consist of 35 mm wooden tongue and groove planks, and the sides of the floor are fixed to horizontal steel supports. The 2,25 m and 3 m containers can also be ordered with 3 mm hot dip galvanised floor with an anti-slip surface.

Safety advice - Maximum Load

Floor surface - 500 kg/m²
Floor when moved with crane - 1500 kg
Floor when moved with forklift truck - 3000 kg
Roof surface - 100 kg/m²

Accessories for storage containers

Dancover offers various items for your storage container, which will customised and improve your storage solution. You can have various shelves, a drive-in ramp, gas cylinder holder, double wing door, fork guides, and a vandal bar set. If you have any questions about our storage containers or the various accessories, please contact our Storage Experts at Dancovershop.com.

Please note: If you want air grilles installed in your container, you need to order this together with your container(s). You can alternatively order one or more air grilles later and install them in the container yourself. You then have to cut a hole for the air grille and mount it with four blind rivets. You can also order sidewall doors - please contact our customer service.

Safety Advice

In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.Do not pack or unpack your tent at subzero temperatures.Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.Please note that the Dancover warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.We recommend you to check whether your tent is covered by your home contents insurance.

Manual

#1ST83000.pdf