• Material
  Polycarbonate
• Colour
  Grey
• Certificate
  IP65, IK08
• Electrical Component
  true
• Product Number
  AC175021
• Weight (kg)
  9
• Height (m)
  0.083

Grow light in the spectrum from app. 420 - 660 nmFor activating photosynthesis and moreCan be used in temperatures up to 40⁰ CIP65 safety classificationLow energy consumptionBuilt-in non-replaceable 5730 SMD LED light source102W (equivalent to a traditional lamp of 384W)Up to 50,000 hours of light5 m rubber connection cable with plug2 m connection cable between each grow lightDo not require installation – just plug it inSize: length 1,260 mm x width 79 mm x height 83 mmWeight: 9 kgLED grow light for growing plants in the early spring, for growing plants inside, or for the dark winter. These LED grow lights will do wonders for your plants without you have to spend a fortune on electricity. The grow light is easy to hang up using the built-in eyelets and you simply plug it in using the 5 m connection cable with a plug. The two grow light lamps are connected with a 2 m connection cable. The LED grow light emits the right frequency of blue, green, and red light in the spectrum from app. 420 - 660 nm (nanometres). The blue wavelength of 400-500 nm has an effect on the plant growth and flowering. In general, the blue light can increase the overall plant quality providing leafy green and healthy produce. The green wavelength of 500-600 nm is not absorbed as easily as the blue and red light but it is still important to the photosynthesis and especially to the lower parts of the plants making them stronger. Finally, the red wavelength of 600-700 nm is very effective in stimulating the photosynthesis and making the plants grow. All in all, with one or more of these high-quality grow lights, you can take good care of your plants when the sun is missing or you grow plants inside your house or inside a storage tent or similar.The amount of light plays an important role in growing most kinds of plantsIf you have grown seedlings inside in the early spring, you know the problem of plants stretching against the light becoming too tall and thin. This is because your ordinary light inside does not contain all the colours or wavelength the plants need to become strong and healthy. Using a grow light will prevent the plants from stretching and instead they will grow to become strong, resistant, and produce flowers or fruit etc. For the grow light to do the job, you need to make sure that the light is distributed evenly over your plants.

In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.Do not pack or unpack your tent at subzero temperatures.Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.Please note that the Dancover warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.We recommend you to check whether your tent is covered by your home contents insurance.