Характеристики и подробности - Изображение 1

Характеристики и подробности - Изображение 2

Характеристики и подробности - Изображение 3

+1 повече

Heavy duty construction for frequent erection and disassembly

Product Specifications

Roof Material

Heavy PVC
Roof Material Weight

650 g/m²
Sidewall Material

Heavy PVC
Sidewall Material Weight

650 g/m²
Frame

Aluminium EN AW 6005A-T6
Colour

White
Fire Safety

BS 7837 Certificate
Side Height (m)

2.3
Product Number

PT22100
Tubes/fittings (mm)

94/48/3 mm
Snow Load (kg/m²)

30
Ridge Height (m)

3.74
UV-resistant

UV-resistant
Water Resistance

100% Waterproof

Product Info

Heavy duty construction for frequent erection and disassembly
Tent frame made of hard pressed European anonised aluminium
Connecting parts manufactured from corrosive resistant hot dipped galv. steel
Quality fitted cover manufactured using low-wick and anti-fungicide
Flame retardant acording to DIN 4102 B1, M2, BS 5438/7837; USA NFPA 701
Smart construction for quick assembly
Bay spacing: 3.00 m
Roof pitch: 20°
Section size: 3.00 m
Longest component: 3.50 m
Ready for enlargement with sections of 3.00 m
Maximum tent length: no limit
Maximum allowed wind speed: 80 km/h. (force 9)

Please note that the shown images are intended as a guide. Small details may vary from tent to tent.

Want to make your party magnificent and unique? Check out our great professional party tents built in heavy duty aluminium and strong PVC! The professional marquee, EventZone from Dancover, is the perfect solution for any type of event or occasion.
All our professional party tents are designed and constructed from our experiences with the rental market as supplier. Thus, Dancover comply with the demands made on quality, long life as well as frequent and easy erection and disassembly. All our EventZone professional marquees are delivered with a wide entrance door with strong zippers and two strong Velcro strips.

The price includes arched windows on both sides.

Construction

The tent frame of our EventZone professional marquees is made of state of the art hard pressed extruded aluminium and the whole set-up is designed with the aim of creating a marquee that is quick to assemble.
We deliver our EventZone professional marquees in a wide range of sizes. All of them are designed and built in sections ready for enlargement. Standard structures are supplied as frame and covers complete with all bolts, earth anchors, base-plates, curtain rails (if required) and PVC coated bracing wires etc.

Tent canvas

Our EventZone professional marquees come as standard with roof cover and side walls in sections of 3 meters. The long sides come with arched windows whereas the end walls can be plain without windows. All sections can be split in half and used as a dooropening, closed with strong zippers. The marquee canvas is a strong, glossy, waterproof PVC coated polyester.
The standard colour of our professional marquee is white.
Our EventZone professional party tents come complete with strong stake pegs for grounding.

Safety Advice

Condensation

Note: Temperature changes and moisture in the air can cause dew or condensation to appear outside and inside a marquee. This is normal and does not mean the marquee is leaking.

Do not put up your tent in extremely bad weather – i.e. strong winds, heavy rain or snow. If you have put up the tent already, be sure to take it down immediately in case of bad weather.

In some countries, approval is needed to set up a tent larger than 75 m².

In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.

Your tent is intended as a temporary form of coverage. It is to be used on an occasional and non-permanent basis only.

When it rains, a risk emerges that water pile up on the roof of your tent and causes the tent to collapse. It is your responsibility to keep the roof cover free of water. Be sure that it is fully extended and please remove standing water that builds up during rainfall.

When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.

Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.

Do not pack or unpack your tent at subzero temperatures. Doing so can cause crazing – especially to tent windows in sidewalls.

Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.

Please note that the warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.

We recommend you to check whether your tent is covered by your home contents insurance.

Application Info

Marquees are made for use at parties and other festive arrangements and are as such only meant for short term temporary assembly and the following disassembly. Please note that the warranty will not apply if used in any other way.