• Material
  Hot-dip galvanized steel
• Material Weight
  0.75 mm
• Product Number
  ST83020
• Inner Height (m)
  2
• Inner Length (m)
  2
• Inner Width (m)
  2.07
• Weight (kg)
  200200.01
• Side Plate Thickness (mm)
  0.75
• Roof Plate Thickness (mm)
  0.75
• Water Resistance
  100% Waterproof
• Port WxH (m)
  1,93x1,93

Strong and flexible storage solutionFor outdoor and indoor useDouble wing doors for easy accessHandle and lock includedFramework in 2 mm galvanised steelContainer capacity: up to 2 m3 (2.000 litres) of oil based products and flammable materialsBunded floor: 2,5 mm hot-dip galvanised steel, covered with removable galvanised grillBunded floor capacity: 202 litres2 pairs of air grills are includedThe sturdy and flexible environment storage container is the perfect solution when you need safe and flexible storage for oil based products and flammable materials. The container can be easily be assembled and disassembled by using the enclosed bolts, and this means that you always can adjust your storage capacity in accordance to your changing need for storage space.  Our environment container with bunded floor is designed for temporary storage of materials that require a special tank able to catch the possible leakage of oil based and flammable liquids. The container can store up to 2 m3 (2,000 litres). The container is perfect for storage of oily materials and liquids with a flash point higher than 100⁰ C.The walls of the storage containers are made of 0,75 mm thick corrugated galvanised steel. The sides are riveted to a steel support made of 2 mm galvanised steel – and corner angles are made of 3 mm steel. The bunded floor is made of 2,5 mm hot-dip galvanised steel, covered with a removable galvanised grill. The bunded floor capacity is 202 litres. The entire container is in galvanised steel. The corner angles are used to join the various parts of the container (floor, sidewalls, top) to transport position and for general assembly. Two outside corner angles are provided with pegs for stacking containers in transport position. Corner angles are also equipped with holes, enabling the container to be suspended by crane. Both wing doors are made of 0,75 mm corrugated galvanised steel and riveted to steel supports of the door. Frames are made of 1 mm galvanised steel. The door is secured by a pull draw lever, door handle, lock with plug and prevention against buckling.Safety advice - Maximum Load Floor surface - 500 kg/m2 Floor when moved with crane - 1500 kg Floor when moved with forklift truck - 3000 kg Roof surface - 100 kg/m2Accessories for storage containers Dancover offers various items for your storage container, which will customised and improve your storage solution. You can have bunded shelves, a drive-in ramp, gas cylinder holder, double wing door, fork guides, and a vandal bar set. If you have any questions about our storage containers or the various accessories, please contact our Storage Experts at Dancovershop.com.

In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.Do not pack or unpack your tent at subzero temperatures.Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.Please note that the Dancover warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.We recommend you to check whether your tent is covered by your home contents insurance.