• Matériau
  Acier galvanisé
• Couleur
  Anthracite
• Numéro de produit
  MS117180
• Poids (kg)
  68.4
• Profondeur (m)
  0
• Hauteur (m)
  2.26
• Épaisseur des plaques latérales (mm)
  0.3
• Épaisseur des plaques de toit (mm)
  0.3
• Résistance à l’eau
  100% Étanche

• Surface au sol 7 m²
• Extension pour abri de jardin avec lucarne
• L’extension comprend deux postes
• Hauteur d’entrée 220 cm
• Distance entre les postes : 233 cm
• Épaisseur de la plaque de paroi et de toit : 0,3 mm
• 3,0 mm acier galvanisé pour les connexions et ancrages
• Toit plat avec deux sorties et tuyaux de descente
• Kits d’ancrage et de fixation complets inclus

Une extension ou un surplomb pour notre abri de jardin ProShed® moderne avec un lucarne intégrée autour du dessus. L’extension est dans le même design contemporain que l'abri et correspondra complètement. La fixation de l’extension à l'abri est facile, vous donnant encore plus d’espace pour le stockage et l’abri. Les 7 m² sous l’extension sont parfaits pour les vélos, une poussette, du bois pour chauffage ou comme une pièce abritée pour se détendre dans des chaises confortables. Comme l'abri, l’extension est munie d’une gouttière, de prises et de tuyaux d’évacuation pour éloigner la pluie.

Safety Advice


When establishing a metal shed it is your responsibility to comply with local rules and regulations and to ensure that the shed is assembled correctly according to the enclosed manual. It is very important that you assemble all parts according to the instructions. Do not skip any parts or any steps.
Protective gear for assembly: Please take care when assembling the metal shed as some parts may have sharp edges. Use work gloves as recommended in the manual – and preferably shoes and safety goggles. If using a ladder or power tools, be sure to follow the manufacturer’s safety advice. Keep children away from the assembly site. Do not lean against the metal shed during construction. Do not place your metal shed in an area with excessive wind. Do not attempt to assemble this shed if you are tired, have taken drugs or alcohol.
Base for the shed: Make sure that you place the metal shed on a firm and plane surface preferably concrete, but flagstones, wood, or gravel can also work. The base must be 100% in level and with the right angles – check by measuring the two diagonal dimensions. Always fasten the structure to the base to prevent accidents in case of extreme weather. Furthermore, make sure that doors are closed in case of a storm.
Metal sheds are temporary structures: Please note that even though our metal sheds are sturdy and durable structures, they are not permanent buildings as such so it is upon you to regularly check the structure to make sure that it is safe and in working order. As the metal shed is made of lightweight materials, you must make sure that the shed at all times is safely secured and fastened to the base so the shed does not cause damage to others in case of bad weather. Be sure that you do not hit any hidden cables or pipes in the ground when inserting the ground anchors or similar.
Condensation: Please be aware that temperature changes and moisture in the air can cause dew or condensation to appear outside and inside your ProShed garden shed as it is not insulated. This is normal and does not mean your ProShed is leaking.
Insurance: Please check whether a metal shed is covered by your home contents insurance. It is your responsibility to lock the metal shed to prevent theft from the premises – all our metal sheds are lockable but in general, you have to provide the padlock. Never stay inside the shed during extreme weather conditions. In the event of snow always remove snow from the roof as heavy snow may cause the shed to collapse. Please note that you can buy reinforcement rafters for some of our metal sheds if you live in areas with much snow.
Warranty information: Dancover warranty applies only to the normal use of the product, normal wear and tear excepted, in accordance with written use instructions or manual. If you need to clean your metal shed at some point, only use a mild detergent and lukewarm or cold water. Do not use strong agents of any kind.

Attention! This structure is not tested for specific snow and wind loads! When it snows, it is your responsibility to remove the snow from the roof of the structure in order to secure it from damage.