• Material
  Galvanised steel
• Colour
  Anthracite
• Wall Board Thickness (mm)
  0.25
• Side Height (m)
  1.799
• Product Number
  MS117110
• Roof Board Thickness (mm)
  0.25
• Outer Length (m)
  2.67
• Outer Width (m)
  2.24
• Weight (kg)
  86
• Depth (m)
  0
• Ridge Height (m)
  2.024
• Side Plate Thickness (mm)
  0.25
• Roof Plate Thickness (mm)
  0.25
• Water Resistance
  100% Waterproof
• Door WxH (m)
  1,03x1,73

Maintenance free materials Elegant panel design Skylight for light inside the shed during daytime Skylight in solid and transparent 2 mm PC Rain gutter with two water outlets Full roof and wall bracing for better strength Double sliding doors for easy access Door size 1.03x1.73 m Wall plates in galvanised steel (0.25 mm) Frame in galvanised steel (0.6 mm) External measurement (incl. eaves) 6.64 m² Outer dimensions at ground level: 2.24x2.67 m Ground area 5.98 m² With this compact garden shed with skylight, you can look forward to having your garden tools and equipment nicely stored, perfectly assembled, and well protected in one place. Our maintenance free and practical garden shed in a modern design offers the extra room you need to keep your garden accessories in order. The elegantly built-in skylight will provide light inside the shed during daytime so you can find the things you are looking for in seconds. The maintenance free garden shed will help you organise your garden tools and more for many years without you having to worry about rust, rot or peeling. The double sliding doors secure easy access to the shed. Dancover expert tip: We recommend you place your new Dancover garden shed on a firm and level surface such as concrete, paving slabs, wood, etc. However, if you would like to place your garden shed on a grass surface, we recommend that you start by placing a tarpaulin or similar as membrane, then place your garden shed on top and finally install a floor inside the shed. This will provide better insulation and minimise condensation.

Safety Advice


When establishing a metal shed it is your responsibility to comply with local rules and regulations and to ensure that the shed is assembled correctly according to the enclosed manual. It is very important that you assemble all parts according to the instructions. Do not skip any parts or any steps.
Protective gear for assembly: Please take care when assembling the metal shed as some parts may have sharp edges. Use work gloves as recommended in the manual – and preferably shoes and safety goggles. If using a ladder or power tools, be sure to follow the manufacturer’s safety advice. Keep children away from the assembly site. Do not lean against the metal shed during construction. Do not place your metal shed in an area with excessive wind. Do not attempt to assemble this shed if you are tired, have taken drugs or alcohol.
Base for the shed: Make sure that you place the metal shed on a firm and plane surface preferably concrete, but flagstones, wood, or gravel can also work. The base must be 100% in level and with the right angles – check by measuring the two diagonal dimensions. Always fasten the structure to the base to prevent accidents in case of extreme weather. Furthermore, make sure that doors are closed in case of a storm.
Metal sheds are temporary structures: Please note that even though our metal sheds are sturdy and durable structures, they are not permanent buildings as such so it is upon you to regularly check the structure to make sure that it is safe and in working order. As the metal shed is made of lightweight materials, you must make sure that the shed at all times is safely secured and fastened to the base so the shed does not cause damage to others in case of bad weather. Be sure that you do not hit any hidden cables or pipes in the ground when inserting the ground anchors or similar.
Condensation: Please be aware that temperature changes and moisture in the air can cause dew or condensation to appear outside and inside your ProShed garden shed as it is not insulated. This is normal and does not mean your ProShed is leaking.
Insurance: Please check whether a metal shed is covered by your home contents insurance. It is your responsibility to lock the metal shed to prevent theft from the premises – all our metal sheds are lockable but in general, you have to provide the padlock. Never stay inside the shed during extreme weather conditions. In the event of snow always remove snow from the roof as heavy snow may cause the shed to collapse. Please note that you can buy reinforcement rafters for some of our metal sheds if you live in areas with much snow.
Warranty information: Dancover warranty applies only to the normal use of the product, normal wear and tear excepted, in accordance with written use instructions or manual. If you need to clean your metal shed at some point, only use a mild detergent and lukewarm or cold water. Do not use strong agents of any kind.

Attention! This structure is not tested for specific snow and wind loads! When it snows, it is your responsibility to remove the snow from the roof of the structure in order to secure it from damage.