Marquee SEMI PRO Plus 7x7 m PVC 900, White

+11 mai mult

New feature – Velcro closure! Marquee for any festive event or activity. White.

Product Specifications

Roof Material

Strong PVC
Roof Material Weight

500 g/m²
Sidewall Material

Strong PVC
Sidewall Material Weight

500 g/m²
Frame

Galvanised steel tubes
Colour

White
Fire Safety

EN 13501-1:2018 Certificate
Construction according to

EN 1090-1:2009+A1:2011
Included

Ground bar, ground pegs
Side Height (m)

2.3
Product Number

PT18441
Tubes/fittings (mm)

50x1.5 mm, 38x1.1 mm / 54x1.5 mm
Weight (kg)

241
Ridge Height (m)

3.42
Persons

42-50
UV-resistant

UV-resistant
Water Resistance

100% Waterproof
Port WxH (m)

1,75x2,3/5,2x2,3

Product Info

Velcro door opening in both endwalls
Low priced alternative to our Pro Party Tent Marquees (rental quality)
The PVC fabric is tested following: DIN 4102 - B1/B2, M2
Arched windows on the long sides offer a good inflow of light
Entrance door in both of the end walls
Easy assembly

Accessories (To be ordered separately)

We recommend that you buy storm straps and extra long ground pegs to further secure your Party Tent Marquee in case of windy weather.

Description

Dancovers series of Party Tent Marquees with hot-dip galvanised steel frame, PVC canvas and a number of smart features is the perfect solution for local societies, clubs, markets, wedding parties, birthday parties, confirmations, A-levels parties or other festive events or activities where a low priced alternative to our Professional Party Tent Marquees is required.

Construction

The strong steel frame of the Party Tent Marquee is hot-dip galvanised and is furthermore easy to assemble. The Party Tent Marquee is delivered with a ground bar set and ground pegs for increased stability.

Tent canvas

The canvas of the Party Tent Marquee is beautifully made and has a built-in rip stop function to prevent tearing. The roof cover of the Party Tent Marquee is made of an extra strong PVC quality. The arched windows on the long sides offer a comfortable inflow of light and a nice view out of the Party Tent Marquee. The Party Tent Marquee has an entrance door in each of the end walls.

Safety Advice

Condensation

Note: Temperature changes and moisture in the air can cause dew or condensation to appear outside and inside a marquee. This is normal and does not mean the marquee is leaking.

Do not put up your tent in extremely bad weather – i.e. strong winds, heavy rain or snow. If you have put up the tent already, be sure to take it down immediately in case of bad weather.

In some countries, approval is needed to set up a tent larger than 75 m².

In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.

Your tent is intended as a temporary form of coverage. It is to be used on an occasional and non-permanent basis only.

When it rains, a risk emerges that water pile up on the roof of your tent and causes the tent to collapse. It is your responsibility to keep the roof cover free of water. Be sure that it is fully extended and please remove standing water that builds up during rainfall.

When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.

Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.

Do not pack or unpack your tent at subzero temperatures. Doing so can cause crazing – especially to tent windows in sidewalls.

Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.

Please note that the warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.

We recommend you to check whether your tent is covered by your home contents insurance.

This structure is not tested for specific snow and wind loads. When it snows, it is your responsibility to remove the snow from the roof of the structure in order to secure it from damage.

Application Info

Marquees are made for use at parties and other festive arrangements and are as such only meant for short term temporary assembly and the following disassembly. Please note that the warranty will not apply if used in any other way.

Manual

#1PT18441.pdf #2marquees_safety_advice_lang_en.pdf

Purchase Spare parts