• Roof Material
  Strong PVC
• Roof Material Weight
  600 g/m²
• Sidewall Material
  Strong PVC
• Sidewall Material Weight
  600 g/m²
• Frame
  Hot-dip galvanised steel
• Colour
  White
• Fire Safety
  BS 5438:1989 2B Certificate
• Included
  Stake pegs
• Side Height (m)
  4.1
• Product Number
  ST03449
• Tubes/fittings (mm)
  76x2 mm + 60x1.5 mm
• Weight (kg)
  1960
• Ridge Height (m)
  5.3
• UV-resistant
  UV-resistant
• Water Resistance
  100% Waterproof
• Port WxH (m)
  3,4x3,7

Sturdy and strong boat shelter for secure storage Large doors secure easy access Construction secures a room for working on the boat  Sturdy and durable quality for both frame and cover Construction provides air circulation Cover is waterproof and UV-resistant Rip stop-function will limit damage in the event of accident  Boat shelters from Dancover are designed and made to store sailboats, motor boats, campers and caravans in many different sizes. The well thought out details and great functionality make the OceanCover boat shelters perfect for storing boats while on land, or various vehicles when not in use for a short or long period. The boat or the car will be perfectly protected from the rain, snow, sun or wind, and due to the spaciousness of the storage tent, you will have room to work on the boat and at the same time be sheltered while working. It means that preparing for the upcoming season will be easy without having to worry about the weather. Another benefit of storing your boat in an OceanCover boat shelter is that you do not need to worry about the bird droppings on the boat that one usually has to deal with in and around the harbour. Boat shelters in a sturdy quality Boat shelters from Dancover have a frame that is bolted together with heavy bolts and stabilised with heavy purlins and wind stabilisers. This provides maximum strength to the whole structure, which has large square steel footplates, and provides a sturdy foundation on the ground. Boat shelters are made with a strong steel frame and are constructed with tubes built to last a long time due to the sturdy and galvanised steel tubes. You assemble the frame in advance or directly around the boat. It is important to secure the OceanCover boat shelter with the included ground pegs so it is safe in case of a powerful wind. Furthermore, the cover has a dirt skirt of approximately 1 m, which must be dug into the ground if possible or secured differently. The cover is flame-retardant. However, under no circumstance should open fire or other sources of ignition come near the shelter. If the boat shelter is to be placed on a hard surface like concrete, you can secure the boat shelter with expansion bolts. Boat shelters from OceanCover with easy accessBoat shelters are equipped with two manually operated pulley doors made of the same material as the cover. These two doors help opening up the shelter completely when needed and provide an easy access to the boat shelter when you want to work on the boat. The OceanCover boat shelter is made to secure air circulation, which will prevent condensation inside the shelter. The PVC cover has a 3-layer construction with an outer coating to prevent dirt build-up and to make cleaning easy. The built-in ripstop construction will prevent the tarpaulin from tearing in the event of an accident. The cover is UV-resistant, which is secure and very durable. Please note that the pictures serve as a guide. The numbers of zips on the door of the boat shelter may vary. It will not though affect the easy access or anything else.

Safety Advice


Condensation
Note: Temperature changes and moisture in the air can cause dew or condensation to appear outside and inside a marquee. This is normal and does not mean the marquee is leaking.


In some countries, approval is needed to set up a tent larger than 75 m².


In the case of strong wind, it is your responsibility to secure the tent adequately and prevent it from injuring materials and people.
Your tent is intended as a temporary form of coverage. It is to be used on an occasional and non-permanent basis only.
When it rains, a risk emerges that water pile up on the roof of your tent and causes the tent to collapse. It is your responsibility to keep the roof cover free of water. Be sure that it is fully extended and please remove standing water that builds up during rainfall.
When it snows, a risk emerges that snow pile up on the roof of your tent. Heavy snow may cause the tent to collapse. It is your responsibility to remove snow from the roof of your tent and save your tent from damage.
Please be sure that your tent is completely dry before you take it down and pack it up. Thus you avoid mould and mildew.
Do not pack or unpack your tent at subzero temperatures. Doing so can cause crazing – especially to tent windows in sidewalls.
Do not use open fire, welding equipment or other sources of ignition, inside or close to the tent.
Please note that the warranty applies only to the normal use of the product happening in accordance with the written instructions in your manual. The warranty does not cover normal wear and tear. Neither does it cover damage, defect, wear and tear caused by misuse, poor maintenance, abuse, unauthorized modification or exposure to bad weather conditions.
We recommend you to check whether your tent is covered by your home contents insurance.

This structure is not tested for specific snow and wind loads. When it snows, it is your responsibility to remove the snow from the roof of the structure in order to secure it from damage.